New products
New products
Perfect Grade
-
Model - Perfect Grade -...
Flying down to the battlefield with Setsuna, F · Seiyi who was awakened by Innovator as a body equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. The aircraft that was active in "Mobile Suit Gundam 00V Senki" is kitized with PG!
Refined proportions, renewed coloring and texture expression.
Adjust proportions of each part such as legs, head and shoulder. By new modeling parts, make it more refined impression.
Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.
Armed parts cover variable light gimmicks
GN Bustor Sword II reproduces the light gimmick by LED.
Newly developed light guiding parts of the new mechanism (patent pending) by understanding the setting shape and performing detailed light guidance analysis and design
Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
GN Qatar can reproduce various variations such as mount to the leg part by itself, connected state and so on.
GN Sword II Long / Short form can be reproduced by replacing, Long rifle in rifle state, Short can be reproduced using lead wire injection mode.
[INCLUDED ACCESSORIES]
GN Buster Sword II × 1
GN Sword II Short × 1
GN Sword II Long × 1
GN Qatar × 2
GN beam sabel × 2
GN Sword II Blaster × 1
Action base × 1
[CONTENTS]
Sprue × 44
foil seal × 1
Marking seal × 1
Dry decal × 1
GN drive × 2
LED unit × 2
Hexagon bolt × 2
Screw (long) × 4 (short) × 2
Hexagon nut (large) × 2 (small) × 6
Coil spring × 8
Rubber seal × 2
PE sheet 2 types × 1 each
Bis × 1
Lead wire × 1
Instruction manual x 1
-
Model - Perfect Grade -...
The PG Wing 0 Custom was quite an accomplishment for the engineering staff at Bandai. But they are not the type to sit idly by and so they created this masterpiece - the Perfect Grade Gundam Mk-II, Lets start with the package - in a word - huge! Over 739 parts on 30 trees of injection molded and ABS plastic. 2 books - one on the construction and one on the history of the mech with color art. A very large press-on markings sheet that is unbelievably detailed.
The skeleton of this kit is amazing. Made from ABS plastic and fully articulated with all the hydraulic pistons molded in metal-like chrome. This skeleton system is similar to that found in the new MG G Gundam kit and is very sturdy without the tendency to slip like earlier kits. The covering armor is totally removable and easily attached.
All parts are pre-colored and like all other PG kits it simply snaps and screw together. However painting of the parts will greatly enhance the appearance.
This is Bandai's most amazing kit to date. I wonder what they will do for an encore?
-
Model - Perfect Grade -...
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - Perfect Grade -...
The newest Perfect Grade kit is none other than the Strike Freedom Gundam! The Strike Freedom, with its expandable Super Dragoons, is the largest PG kit ever released. Completely new molds were used in the production of this kit and Bandai has outdone themselves when it comes to engineering something made of so many small (and not so small) parts, particularly in the joints and armor where the gold frame parts are viewable. Bandai has designed new, sturdier joints to hold this hefty kit once it is completed, and it includes weapons and accessories such as the Beam Shield, two Beam Rifles, two Railguns, eight Super Dragoons, a display base, and an LED unit for the head! Plus Katoki Hajime's notorious plethora of markings! Are you game?
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - Perfect Grade -...
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - Perfect Grade -...
This is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe.
The largest and most detailed plastic model kit in Bandai's history is finally here! With a kit this amazing, it's simply impossible to mention everything, so please be willing to settle for the highlights:
37 runners of parts (825 total pieces). About 50 locations secured by metal screws. Speaking of metal, the landing gear struts are die-cast. Five different locations light up on the finished kit (eyes, tail fin, beam saber and both wingtips, batteries included!). Full inner mechanism detail on all limbs. Opening panels on the head, chest (inc. cockpit) and more. Fingers are individually-jointed. Comes with two beam sabers, shield, two grenade packs and the huge beam rifle. Locking systems provide stability in both Wave Rider and Mobile Suit modes, so things don't flap around like they do on the Master Grade kit. Separate cardboard manual describes with concise photos how to transform between the two modes. Comes boxed in two separate inner boxes that are held together by a rugged outer cardboard box with carrying handle! Whew!
-
Model - Perfect Grade -...
Are you ready for the ultimate Gundam kit? The PG Unleashed RX-78-2 Gundam is history-making in its number of gimmicks and new technologies, resulting in a splendid build like you've never seen before!
It features the Gunpla Evolution Link System, which adopts a step-by-step assembly process to simulate the experience of building a real Mobile Suit!
Its internal frame, which serves as its skeleton, is assembled in the earliest stage in the history of the Perfect Grade lineup, and it's also the largest frame in the history of Gunpla, with a total height of about 18cm.
The kit will have over 90 points of articulation after assembly -- the largest number of joints in Gunpla history! -- for extreme posability! Its fuselage, which uses a core block mechanism, uses a new structure that combines 40 joints.
Metallic molding color and plated parts are used for the multi-layer truss frame to create four distinct metallic expressions; three kinds of secondary processing such as silver plating, matte plating and chrome plating are combined with metal parts and newly developed etched seals to make the Gundam look even more amazing than ever before.
In addition, this kit is equipped with the most full-body open-hatch gimmicks ever seen in a Gundam kit, and it also includes a new LED unit! The unit includes a new compact RGB two-lamp type LED light that enables color change, and a design that maximizes its efficiency. A very small lighting unit is also installed in the beam saber! The beam blade will be lit from the base in a gradation for ultimate realism. A pin-type BR435 lithium battery (one test battery included) and two LR41 button-cell batteries (not included, sold separately) are required for the light effects.
Don't miss out on this ultimate Gundam kit -- order yours now!
[Includes]:
Beam rifle
Beam saber (x2)
LED beam saber
Shield
Core fighter
RBG 2-lamp LED
Interchangeable hands, left and right (x4 each)
Figure (x4) (Amuro standing x1, sitting x2; Seira standing)
Metal parts for vernier (x2)
Metal parts for Vulcan (x2)
Saber assembly auxiliary jig
Pin-type BR435 lithium batter for test
Magnet unit
Metal plate for magnet (x2)
Marking sticker
Name seal
Etching sticker
Metallic 3D sticker
Instruction manual
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - Perfect Grade -...
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
-
-
Model accessories - Perfect...
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.