Funko POP
.
New products
New products
Model
-
Model - High Grade - Gundam...
This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.
The Rising Freedom Gundam from "Mobile Suit Gundam Seed Freedom" is now a HG model kit from Bandai! It's equipped with the "Seed Action System" internal structure that specializes in reproducing impressive poses! It can transform into its MA form by replacing some parts. A new shield combining offense and defense is included; clear parts are also included for the shield. The beam shield also uses polarized molding that changes color depending on the angle it's viewed from, for a beautifully shining effect! The two beam sabers can be connected. The powerful Hi-Mat Full Burst can be expressed with gimmicks such as the wing on the back, the deployment of the Agni cannon, and the extension of the waist rail gun's barrel. A mechanism allowing the connecting shafts of the hip joints to slide independently promotes bold movements of the legs, too! This kit is molded in color, so you can get a satisfying finish just by assembling it, without the need for paint. Order it for your own collection today!
Includes :
Beam rifle
Beam saber (x2)
Shield
Beam shield
Effect parts (x1 set)
Hand parts (x1 set)
Joint parts
Stickers
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - High Grade - Gundam...
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - Master Grade -...
The Wing Gundam Zero from "Mobile Suit Gundam Wing: Endless Waltz" now gets a new Ver.Ka release, directly supervised by Hajme Katoki! Each joint has been thoroughly inspected, and the development of the white wings, interlocking gimmicks, and twin-buster rifle shooting poses has been pursued. As a new gimmick, the twin buster rifle is stored on the wing, and transforms into a Neo Bird form! More images will be added soon -- order this spectacular version of the Wing Zero today!
[Includes]:
Twin Buster Rifle
Beam saber (x2)
Shield
Base
Foil seals
Waterslide decals
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
Master Grade kits are a favorite in the community for their size, detail and functionality. These models are bigger than HG and RG kits, usually standing about 18 to 23 centimeters tall, and most feature an internal skeleton as well as a mini-figure of the pilot. Because of the larger size, designers are able to include more functioning parts such as sliding/opening cockpits and full finger movements. Master Grades are usually 1/100 scale.
-
Model - 30 Minutes Fantasy...
Bandai's new figure-kit series, "30MF (30 Minutes Fantasy)," debuts with the Rosan Knight! This new lineup allows you to create your own fantasy-based figures and characters! The starter set includes armor and armed parts in addition to the base "silhouette" (elementary body). The "silhouette" is fully posable like a human body; movable axes are provided on the head and neck for natural flexibility. The new structure of the shoulder joint keeps the body line intact, even in bold poses. The movable parts of the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to create natural poses. Armor and armed parts are included to combine with the "silhouette" to create the Rozen Knight! A new mechanism for attaching shoulder and waist armor via joints on the back allows for flexible movement; swords and shields can also be mounted on the back or waist with joint parts. Order him for your own collection today!
[Includes]:
Sword
Shield
Armor parts (x1 set)
Hand parts (x1 set)
Joint parts (x1 set)
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - 30 Minutes Missions...
The new Maxion EXAMACS "Acerby" action figure model-kit lineup from Bandai's "30 Minutes Missions" series now includes a Type E with a newly designed blade! This model kit comes with parts to build the figure itself, armor parts, and weapons too. Two types of armor that can be attached to the shoulders and waist are included; the head visor can be adjusted up and down by replacing parts. The clear parts of the visor can be removed and connected to the waist joint parts, and the newly designed energy blade can be removed from its sheath. A chest part is also included that can be customized with the armor that comes with the Spinatia (sold separately). Place your order today!
Includes :
Energy blade
Blade submachine gun
Hand parts
Armor
Joint parts
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - 30 Minutes Fantasy...
The Liber Fighter hails from Bandai's "30 Minutes Fantasy (30MF)" model-kit series, where you can create your own fantasy job! This starter set includes the base Silhouette (body) as well as armor and weapons. The Silhouette is capable of flexible human-like actions, and can be used for just about any sort of fantasy job. The head and neck have movable axes, allowing you to tuck his chin in, or stick his face out! The shoulder joints are designed with great care to keep the body line intact, even in bold poses. The movable axes on the chest, torso and waist work in conjunction with the sliding mechanism at the base of the waist joint, allowing for natural poses. The Silhouette has a more substantial form than the separately sold Liber Knight.
Combine the Silhouette with the armor and weapon parts to create the Liber Fighter! The shoulder and waist armor can be attached via the joint on the back to allow for flexible movement; the Axe and Round Shield can be mounted on the back or waist using joint parts. The attribute of the Element Core is Earth. The face design and coloring are different from the Rozen Empire Silhouette and Fighter, sold separately. Order yours today!
Includes :
Axe
Round Shield
Armor parts (x1 set)
Hand parts (x1 set)
Joint parts (x1 set)
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - 30 Minutes Fantasy...
The Rozen Fighter hails from Bandai's "30 Minutes Fantasy (30MF)" model-kit series, where you can create your own fantasy job! This starter set includes the base Silhouette (body) as well as armor and weapons. The Silhouette is capable of flexible human-like actions, and can be used for just about any sort of fantasy job. The head and neck have movable axes, allowing you to tuck his chin in, or stick his face out! The shoulder joints are designed with great care to keep the body line intact, even in bold poses. The movable axes on the chest, torso and waist work in conjunction with the sliding mechanism at the base of the waist joint, allowing for natural poses. The Silhouette has a more substantial form than the separately sold Rozen Knight.
Combine the Silhouette with the armor and weapon parts to create the Rozen Fighter! The shoulder and waist armor can be attached via the joint on the back to allow for flexible movement; the Axe and Round Shield can be mounted on the back or waist using joint parts. The attribute of the Element Core is Earth. The face design and coloring are different from the Liber Republic Silhouette and Fighter, sold separately. Order yours today!
Includes :
Axe
Round Shield
Armor parts (x1 set)
Hand parts (x1 set)
Joint parts (x1 set)
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - Armored Core -...
Items from "Armored Core VI Fires of Rubicon" are now joining Bandai's "30 Minutes Missions" series! Based on the key concepts of simple assembly and ease of customization, the AC "Liger Tail" operated by G1 Michigan is now available! The head, core, arms, and legs all use the same structure as the "30MM" series, so you can enjoy assembling the plastic model just like in the game. 3mm joints are used to attach both shoulder weapons and some left-hand weapons, allowing for a wide variety of possible assemblies. It's equipped with a wide range of weaponry, too. Order yours today!
Includes :
DF-GA-08 HU-BEN
DF-ET-09 TAI-YANG-SHOU
BML-G2/P17SPL-16 (x1 set)
SONGBIRDS (x1 set)
Joint parts (x1 set)
Stickers (x2 types)
-
Model - Space Battleship...
The third remodeled Yamato with the participation medal award ceremony paint scheme from "Be Forever Yamato: REBEL 3199" is now available as a 1/1000-scale model kit from Bandai! The anchor mark on the bow is reproduced with a convex mold; the precise details and waterslide decals allow you to express the special commemorative paint scheme. The distinctive deck color is expressed by parts division and some decals; both the two-seat and three-seat versions of the Cosmo Tiger II are included, as is a display stand. You can also build this kit as the "2205" version with different parts and decals. Order this iconic spacecraft for your own collection today!
Includes :
Anchor relief bow part
Undecorated bow part
Display base
Cosmo Tiger II (single seat) (x2)
Cosmo Tiger II (three seat) (x2)
Waterslide decals
Stickers
-
Model - High Grade - Gundam...
Popular SD Gundams from "Mobile Suit Gundam Seed" and "Mobile Suit Gundam Seed Destiny" are back in a set! This fun set of easy-to-assemble and very cute model kits includes the following: BB Senshi 257 Freedom Gundam BB Senshi 280 Force Impulse Gundam BB Senshi 288 Strike Freedom Gundam BB Senshi 290 Destiny Gundam Stickers (x4)
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - Gundam - RX-78-2
Bandai's "Best Mecha Collection" RX-78-2 Gundam is back after more than 40 years! This revival version of this classic model kit is packed with technology cultivated over the course of its evolution in a retro form. Its original shape has been retained, with improvements such as color plates, touch gates and snap-fit assembly added. The shape of each part has been kept intact, and the color-coding of the entire body is reproduced in detail through a refined part configuration. The structure is designed so that the seams in each part will not be visible from the front once assembled; the beam sabers come in two different lengths, and are attached to a backpack. Get in touch with the Gunpla hobby's roots, and order this amazing kit for your own collection today! Includes: Beam rifle Beam sabers (x2) Shield
-
Model - Figure Rise -...
Nina Nanaura from "Mobile Suit Gundam: The Witch from Mercury" joins the "Figure-rise Standard" action-figure kit series from Bandai! A wide variety of facial expressions are reproduced with one tampo-printed part and two for waterslide decals. The inside of her mouth has been divided into parts, and she can be displayed with an open-mouthed smile, or with her teeth showing in a grin! The inner color of her hair is divided into parts. Her uniform is a new design! It comes with parts to expand her range of motion, and soft sleeve parts for a wider range of poses. A special part for the torso is included to express a natural sitting pose, and she comes with ten interchangeable hands and her tablet. Order her for your own collection today!
Includes :
Facial expression part (tampo-printed)
Facial expression parts (waterslide decals) (x2)
Mouth replacement parts
Sitting parts (x1 set)
Soft sleeve parts (x1 set)
Uniform parts for expanding range of motion
Tablet
Hand parts (x1 set)
Waterslide decals
Stickers
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - 30 Minutes Missions...
The new Maxion Army EXAMACS "Acerby" action figure model-kit lineup from Bandai's "30 Minutes Missions" series now includes a Type D with a newly designed blade! This model kit comes with parts to build the figure itself, armor parts, and weapons too. Two types of armor that can be attached to the shoulders and waist are included; the head visor can be adjusted up and down by replacing parts. The clear parts of the visor can be removed and connected to the waist joint parts, and the newly designed energy blade can be removed from its sheath. A chest part is also included that can be customized with the armor that comes with the Spinatia (sold separately). Place your order today!
Includes :
Energy blade
Blade submachine gun
Hand parts
Armor
Joint parts
-
Model - Real Grade - Gundam...
The Shining Gundam from "Mobile Fighter G Gundam" gets a new 1/144-scale "RG (Real Grade)" model kit from Bandai, with a realistic appearance and advanced mobility that allows it to transform into its Super Mode! The entire body is fully posable, so you can recreate Super Mode without parts replacement; the head does not need to be replaced to transform into Super Mode. The shoulder cover has a realistic texture and details, and the arm cover can be retracted and deployed. The internal vernier is exposed when the leg cover is deployed; the toes extend forward while the ankle cover rotates backward for added stability. The internal frame structure is optimized for human-like movement, allowing for more flexible posing. The neck has three-axis mobility, and a swing mechanism allows for more dynamic poses. Hand parts for the "Shining Finger" move are included, of course, and other interchangeable hands are included as well to expand the range of poses. Includes: Beam sword (x2 types) Interchangeable hands (x1 set) Realistic decals
Real Grade kits are generally about the same size as High Grades, but are more detailed, include more parts and have enhanced joint movements. A key RG feature is the internal skeleton, which is constructed first before adding on the outside armor pieces. Real Grades are usually 1/144 scale.
-
Model - 30 Minutes Fantasy...
Bandai's "30MF (30 Minutes Fantasy)" figure-kit series allows you to create your own fantasy-based figures and characters! The starter set includes armor and armed parts in addition to the base "silhouette" (elementary body). The body included with the Liber Lancer is the same as the 30MF Liber Knight; the "silhouette" is fully posable like a human body, including movable axes on the head and neck that allow natural flexibility. The shoulder joints are designed with great care to keep the body line intact even in bold poses; the movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses. Armor and weapon parts are included to combine with the "silhouette" to "change jobs" to that of the Liber Lancer! His weapons are a lance and a shield; flexible movement is achieved by attaching the shoulder and waist armor via the joint on the back. The attribute of the Element Core is "lightning." The face design and color are different from the Rozen Lancer (sold separately). Order him for your own collection today! Includes: Lance Shield Armor parts (x1 set) Hand parts (x1 set) Joint parts (x1 set)
-
Model - 30 Minutes Fantasy...
Bandai's "30MF (30 Minutes Fantasy)" figure-kit series allows you to create your own fantasy-based figures and characters! The starter set includes armor and armed parts in addition to the base "silhouette" (elementary body). The body included with the Rozen Assassin is the same as the 30MF Rozen Knight; the "silhouette" is fully posable like a human body, including movable axes on the head and neck that allow natural flexibility. The shoulder joints are designed with great care to keep the body line intact even in bold poses; the movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses. Armor and weapon parts are included to combine with the "silhouette" to "change jobs" to that of the Rozen Assassin! Two daggers are included as weapons; flexible movement is achieved by attaching the shoulder and waist armor via the joint on the back. The attribute of the Element Core is "water." The face design and color are different from the Liber Assassin (sold separately). Order him for your own collection today! Includes: Dagger (x2) Armor parts (x1 set) Hand parts (x1 set) Joint parts (x1 set)
-
Model - 30 Minutes Fantasy...
Bandai's "30MF (30 Minutes Fantasy)" figure-kit series allows you to create your own fantasy-based figures and characters! The starter set includes armor and armed parts in addition to the base "silhouette" (elementary body). The body included with the Rozen Lancer is the same as the 30MF Rozen Knight; the "silhouette" is fully posable like a human body, including movable axes on the head and neck that allow natural flexibility. The shoulder joints are designed with great care to keep the body line intact even in bold poses; the movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses. Armor and weapon parts are included to combine with the "silhouette" to "change jobs" to that of the Rozen Lancer! His weapons are a lance and a shield; flexible movement is achieved by attaching the shoulder and waist armor via the joint on the back. The attribute of the Element Core is "lightning." The face design and color are different from the Liber Lancer (sold separately). Includes: Lance Shield Armor parts (x1 set) Hand parts (x1 set) Joint parts (x1 set)
-
Model - 30 Minutes Sisters...
Shuremi joins Bandai's "30MS (30 Minutes Sisters)" figure-kit series! Parts are included for her body, three interchangeable tampo-printed faces, and weapons. The hairstyle parts can be divided into two different colors, and she can be displayed with or without horns by parts replacement. Parts of the costume are reproduced with a hole design, and the flame effect on her head is made of clear parts. Create your own sister by combining her with previously released "30MS" face parts, hairstyle parts, and body parts! This figure uses the same 3mm joints as other items in the "30 Minutes" series, so you can use parts from "30 Minutes Missions" items too. Includes: Face parts (tampo printed) (x3) Clear effect parts (x1 set) Bangs hair parts (without horns) Hand parts (x1 set) Weapon parts (x1 set)
-
Model - High Grade - Super...
This is a posable, high-grade or better injection-plastic kit of a science-fiction/anime item. Bandai brings us the first HG (High Grade) model kit of the Ashsaviour from the "Super Robot Wars OG" series! The tip of the Swordbreaker can be deployed, and a display base for the Swordbreaker is included so you can display it in its ejected state. The barrel of the Halberd Launcher can be deployed to recreate the firing scene; a warhead part is included to recreate the firing of the Fire Dagger. The Gun Rapier and Laser Blade are included too, and an Action Base 7 is also included to expand the range of posing! Includes: Interchangeable hand (x1) Halberd Launcher Gun Rapier Laser Blades (x2) Display base for Swordbreaker Warhead part for Fire Dagger firing Action Base 7 Stickers
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - High Grade - Gundam...
"Mobile Suit Gundam GQuuuuuuX," a brand-new "Gundam" movie and TV series, will make its debut shortly -- and now you can add the GQuuuuuuX itself to your collection! Bandai's newest "High Grade (HG)" model kit faithfully reproduces the new Gundam's distinctive form; it's loaded with articulation in the torso, hips, and elsewhere for dynamic posability after assembly! The backpack is flexible and can be displayed at various angles, and a wide variety of weapons are included too. Order yours today! Includes: Weapons (x1 set) Backpack (x1 set) Interchangeable head part Interchangeable hands (x1 set) Stickers Marking stickers
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - High Grade - Gundam...
This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.
From the second season of the hit anime series “Iron Blooded Orphans” comes the menacing and huge Mobile Armor Hashmal! Its arm parts can be display open or closed, and its mouth can be opened to display it with the included beam effect part! Includes a large base made exclusively for the Hashmal, and a sword for HG Gundam Barbatos Lupus!
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
-
Model - 30 Minutes Missions...
The Acerby (Type-C) from the "30Minutes Missions" (30MM) series from Bandai is now available! This kit includes the main body, armor parts, and weapons too. Two types of armor are included that can be attached to the shoulders and waist; the silhouette changes by unfolding the head binder from side to side. The visor on the head can be adjusted up and down by replacing it; the blade part of the included blade submachine gun is separated. Chest parts are included that allow you to customize the armor that cones with Spinatia (sold separately), too! Includes: Blade submachine gun Hand parts (x1 set) Armor Joint parts
-
Model - Pokepla - Pokemon -...
This is an injection-plastic figure kit.
Koraidon is the newest addition to Bandai's "Pokemon Plamo Collection Select Series" lineup! This model kit assembles easily without any tools! The figure will be moveable after assembly, too, so you can create lots of cool poses. Stickers are provided for his eyes. You'll love him -- order yours today!
Bandai offers us very high quality models, without paint or glue.
These models are very easy to assemble and have many points of articulation.
-
Model - High Grade - Gundam...
Ramba Ral's MS-07B Gouf gets the “Revive” treatment with this new release from Bandai! This kit features a slick new redesign with better details and articulation. All parts come come molded in multiple colors and features a snap-fit construction. Comes with two Heat Swords, Heat Rod, Shield and 5-barrel 75mm Machine Gun left hands!
High Grade kits are the most common, have the largest selection, are cost effective and beginner friendly. Size varies, but High Grades are typically around 12 to 15 centimeters tall. If you are new to Gunpla or prefer a more casual build, High Grades are a great choice. High Grades are usually 1/144 scale.
