Ramba Ral's Gouf from "Mobile Suit Gundam" returns to Bandai's "The Robot Spirits ver. A.N.I.M.E." action-figure series! The movable axis built into the chest allows the chest width to change to create a sense of dynamism when holding the heat sword. The elbow and knee joints are more flexible than before, and the incredible heat rod is now a reality thanks to a new construction method (heat press) that has been used to create a heat rod that can be bent freely. Both a long and short heat rod are included. The mono eye can be moved left or right, and a special built-in gimmick allows you to remove the Gouf's arm and replace it with a damaged part. Two types of finger vulcans are included for its left hand, which can be stored in the hand storage deck when not in use.

Figure Size: Approximately 12.5cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (x2 left, x4 right)

Heat sword (blade)

Heat sword (grip)

Heat rod (long)

Heat rod (short)

Upper arm damage parts (x2)

Hand storage deck

Shield

Char's custom Zaku returns to Bandai's new Robot Spirits A.N.I.M.E. lineup! Standing about 12.5cm tall, it's fully posable for maximum action, with improved jointing throughout! It's fully accessorized with four sets of interchangeable hands and a storage part for them, the ZAKU machine gun and bazooka plus effects parts for each, the heat hawk in active and stored modes, two vernier effects, and an explosion effect!

Figure Size: Approximately 12.5cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (x4)

Zaku machine gun

Zaku machine gun effect part

Heat hawk

Heat hawk (in stored mode)

Zaku bazooka

Zaku bazooka effect part

Vernier effect parts (x2)

Blast effect part

Storage deck for hands

The legendary mass produced ZAKU, Zeon mainstay of the One Year War, makes its appearance in Robot Spirits! With phenomenal moving capabilities and a wealth of armaments, it is possible to recreate scenes from the show!

Here comes a special "Robot Spirits" set to commemorate the 15th anniversary of Bandai's fan-favorite action-figure lineup! Robot Damashii Gundam Aerial Ver. A.N.I.M.E. from "Mobile Suit Gundam: The Witch From Mercury" is back with an original base molded in white, with the special "Robot Spirits 15th Anniversary" logo printed on it; Suletta Mercury is the focal point of the special display sheet, along with a dialogue plate! In addition, the beam effect for the saber and blade has also been changed to the same shade of green seen in the anime!

Figure Size: Approximately 12.5cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (x4 each, left and right)

Hand storage deck

Robot Damashii 15th Anniversary commemorative base set

Character cut-in plate set

Gambit set

Beam rifle

Various displays

Set of various joints

Set of various effect parts

The RMS-099 Rick Dias from "Mobile Suit Zeta Gundam" is a next-generation mass-produced machine jointly developed by AEGO and AE. This pre-production mobile suit is piloted by veteran pilots Apolly Bay, Roberto, and others; although it has a mono eye and body structure typical of Zeon-based developers, it's technologically ahead of the Earth Federation Forces, including the use of lightweight Gundarium Gamma and the adoption of an all-sky monitor. This new "Robot Spirits Side MS Ver. A.N.I.M.E." action figure of the Rick Dias faithfully reproduces its appearance in the show; the chest and abdomen have a wide range of movement, allowing for natural tilting, twisting, and warping. The backpack is also movable independently to suit each pose. The elbow joints have horizontal axis movement for both vertical and horizontal motion; the pipe part is stored inside in conjunction with the knee movement. It's equipped with a clay bazooka, two beam pistols, and a beam saber; the clay bazooka and beam pistol can be mounted on its back. Interchangeable hands are included too, including one that reproduces the firing of the Torimochi launcher; the head cover is expanded to reveal the Vulcan Phalanx, and the mono eye can be adjusted. A newly shaped bazooka firing effect is included, and vernier effects can be attached to the legs and shoulders.

Figure Size: Approximately 13cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (left and right, x4 each)

Clay bazooka

Beam pistol (left and right)

Saber grip

Effect parts set

Hand storage deck

The RMS-099 Rick Dias from "Mobile Suit Zeta Gundam" is a next-generation mass-produced machine jointly developed by AEGO and AE. It uses the Gundarium Gamma alloy developed by Axis, and was codenamed Gamma Gundam during development. As Captain Quattro Bajeena's exclusive machine, it features a red body color, but in terms of performance there is no particular difference from the mass-produced model. This new "Robot Spirits Side MS Ver. A.N.I.M.E." action figure of the Rick Dias faithfully reproduces its appearance in the show; the chest and abdomen have a wide range of movement, allowing for natural tilting, twisting, and warping. The backpack is also movable independently to suit each pose. The elbow joints have horizontal axis movement for both vertical and horizontal motion; the pipe part is stored inside in conjunction with the knee movement. It's equipped with a clay bazooka, two beam pistols, and a beam saber; the clay bazooka and beam pistol can be mounted on its back. Interchangeable hands are included too, including one that reproduces the firing of the Torimochi launcher; the head cover is expanded to reveal the Vulcan Phalanx, and the mono eye can be adjusted.

Figure Size: Approximately 13cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (left and right, x4 each)

Clay bazooka

Beam pistol (left and right)

Saber grip

Effect parts set

Hand storage deck

The RMS-179 GM II, a mass-produced main unit widely used by the Earth Federation Forces and Titans after the One Year War in "Zeta Gundam," is now available in Bandai's "Robot Spirits ver. A.N.I.M.E." with even more mobility and versatility! This unit was modified by the Earth Federation Forces after the One Year War, with the cockpit replaced and thrusters added, based on the GM. Its versatility allows it to be used in space, on the ground, and in colonies. The red units on the chest and sole were used by the Earth Federation Forces and Titans. This useful mech's proportions are faithfully reproduced, and it's equipped with a new mechanism for shoulder movement -- in addition to pulling the shoulder block joint forward, it can also be pulled backward. A wide range of motion is achieved by combining the twisting of the upper body, retracting the chest, and pulling the shoulders. A beam rifle, beam saber, and shield are all included, as are various effect parts to recreate your favorite scenes!

Figure Size: Approximately 13cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (left and right, x4 each)

Hand storage deck

Shield

Shield grip

Beam rifle

Joint set

Effect part set

The RMS-106 Hi-Zack, the Earth Federation Forces' first mass-produced mech after the war, with a design based on the Zaku, is joining the "Robot Spirits (Side MS)" action-figure series from Bandai! This mech that symbolizes the technological fusion of the Earth Federation military and the Principality of Zeon military in "Mobile Suit Zeta Gundam" comes with a wealth of options! It's the first Gundam to be equipped with linear seats and a 360-degree ambient monitor as standard equipment, and is made in Titans green. This highly versatile unit can operate both inside and outside the atmosphere, and with additional equipment, can even enter the atmosphere. Its proportions are faithfully reproduced; the chest block can be moved, and the shoulders can be pulled out to recreate bold poses. The elbow joints have horizontal axis movement, and can be moved both vertically and horizontally; the power pipe also moves in conjunction with the movement of the arm. It's equipped with a modified 120mm Zaku machine gun, beam saber, beam rifle, missile pod, heat hawk, and shield. The missile pod can be connected to the base at the back of the waist, and the back of the shield opens to store a spare E-pack for the beam rifle. Vernier effect parts are included for in-flight poses, too!

Figure Size: Approximately 13cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (left and right, x4 each)

120mm Zaku machine gun mod

Heat hawk

Missile pod

Saber grip

Shield

Beam rifle

Spare E-pack for beam rifle (x2)

Beam saber

Weapon mount joint

Effects parts

Hand storage deck

The X-200 series Blitz Gundam from "Gundam Seed," piloted by Nicole Amalfi and equipped with various special weapons, appears in Bandai's "Robot Spirits Ver. A.N.I.M.E." series! The Blitz Gundam specializes in blitzkrieg battles with high mobility. Its characteristic silhouette is carefully modeled; the thruster nozzles and Mirage colloid ducts on the back are carefully color-coded to match its appearance in the anime. This figure is also highly posable. The Trikeros attack shield system equipped on its right arm is equipped with a rifle, saber and lancer dart on the back of the shield; the lancer dart is detachable. A blade made of clear parts can be attached to the beam saber unit. The piercer rock Gleipnir equipped on the left arm can reproduce the injection scene with wire and a vernier effect (Tamashii Stage Act Mechanics items are sold separately). The opening and closing of the claw can be reproduced with replacement parts. This figure also takes advantage of the posability cultivated in the "Ver. A.N.I.M.E." series, such as the left and right chest blocks that are linked with the shoulders, the waist that bends and twists, the sliding hip joints, and the left and right swinging action below the knees. It also comes with a set of parts to reproduce the ending of the battle between the Blitz and the Sword Strike in the 29th episode of the "Gundam Seed" TV series, "Sadame no Wedge.

Figure Size: Approximately 12.5cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (left and right, x4 each)

Hand storage deck

Trikeros set

Gleipnir set

Vernier effect for Gleipnir (x3)

Beam saber blade

"Sadame no Wedge" parts set

The GM Sniper from "Mobile Suit Gundam 0080: War in the Pocket" returns to Bandai's "Robot Spirits Ver. A.N.I.M.E." action-figure lineup! It features superior posability, with a joint in the chest that can bend inward, and an improved range of motion in its legs; the visor can also be opened and closed. It's packing an impressive range of weaponry, too, which can be carried on its back or on the back of the shield. Order yours today!

Figure Size: Approximately 12.5cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (x4)

Storage deck for hands

Shield

Sniper rifle

Sniper rifle mount joint

Bullpup machine gun

Bullpup machine gun mount joint

Shield grip

Forearm shield joint

Shield joint for backpack

Bazooka mount joint

Beam saber effect part (x2)

Beam saber curve effect part

Rifle effect part

Vernier effect part (x2)

Stickers for markings

Roronoa Zoro's 3 swords get in the Proplicaline-up!

Included in this set:

-Wado Ichimonji Sword-Scabbard for Wado Ichimonji

-Alternative parts for Wado Ichimonji

-Sandai Kitetsu Sword

-Scabbard for Sandai Kitetsu

-Enma Sword

-Scabbard for Enma

-Alternative parts for Enma-Safety sheet

-Pedestal to display the whole set

Each sword is made by ABS, PVC and die-cast metal

and is about 95 cm long.

The RX-178 Gundam Mk.II was repainted white after it was taken from the Titans and operated by Ego. The "White Gundam," which demonstrated its superior performance without regret and became a symbol of Ego, now joins Bandai's "Robot Spirits ver. A.N.I.M.E." action-figure lineup with a variety of options! This general-purpose mobile suit was redesigned by the Titans from the RX-78. Bandai's version comes with lots of armaments and parts to display it just as you like.

Figure Size: Approximately 13cm tall

Materials: ABS, PVC

Set Contents:

Main figure

Interchangeable hands (x4 pairs)

Hand storage deck

Shield

Hyper Bazooka

Vulcan Pod System

Beam Rifle

Spare E-pack (x2)

Spare bazooka cartridge

Bazooka cartridge cover

Joint set

Effect set

Is it certain destiny, or a struggle for freedom?

The Rising Freedom Gundam from "Mobile Suit Gundam SEED Freedom" comes to the METAL ROBOT SPIRITS!

The Rising Freedom Gundam from "Mobile Suit Gundam SEED Freedom" is coming to METAL ROBOT SPIRITS. This model is a high-quality finished product styled after the anime, with die-cast parts that that give a sense of weight, intricate coloring, and a variety of armament deployment and built-in transformation gimmicks!

Set Contents:

Main figure

Interchangeable hands (left and right, x3 each)

Beam rifle

Beam saber blade (x2)

Shield

Shield effect part A (x2)

Shield effect part B

Spare antenna

Shield joint set

Stand joint set

Beam shield (x2)

Beam shield mount parts (x2)

Special base set

METAL ROBOT SPIRITS Figures – Bandai / Tamashii Nations

The Metal Robot Spirits line showcases Bandai's expertise in crafting premium articulated figures. Merging precision engineering, die-cast metal components, and exquisite detailing, each release pays tribute to iconic mechas from legendary Japanese anime.

These figures stand out for their metallic inner frames, smooth articulation, and interchangeable weapon sets. The attention to detail—from mechanical joints to high-quality paintwork—makes them a must-have for serious collectors.

A blend of technology and elegance, designed for fans of Japanese mecha at its finest.

The model's painting recreates the characteristic coloring from the movie. Original markings are applied to the entire body, pursuing a sense of density as a weapon. The new railgun weapon is included as an accessory. Joint parts are also included to enable slinging the railgun from the side of the waist to recreate the figure carrying the railgun as seen in the movie. Combine this figure with the Metal Robot Spirits SIDE MS Proud Defender & Effect Parts Set, which is on sale at the same time (sold separately), to recreate Mighty Strike Freedom Gundam.

Contents:

Main body

Exchangeable hand left/right x 3 types

Backpack

Dragoon x 8

Left/right high energy Beam Rifle

Railgun, Beam Shield effect parts x 2

Beam Shield mount parts x 2

Beam Saber handle x 2

Connecting Beam Saber handle

Beam Saber blade x 2

Railgun joint parts

Dragoon joint parts set

Display stand joint parts set

Original display stand set

METAL ROBOT SPIRITS Figures – Bandai / Tamashii Nations

The Metal Robot Spirits line showcases Bandai's expertise in crafting premium articulated figures. Merging precision engineering, die-cast metal components, and exquisite detailing, each release pays tribute to iconic mechas from legendary Japanese anime.

These figures stand out for their metallic inner frames, smooth articulation, and interchangeable weapon sets. The attention to detail—from mechanical joints to high-quality paintwork—makes them a must-have for serious collectors.

A blend of technology and elegance, designed for fans of Japanese mecha at its finest.

The model's painting recreates the characteristic coloringfrom the movie. Original markings are applied to the entire body, pursuing a sense of density as a weapon. Numerous beam effect accessories are included that can recreate the characteristic armaments such as the head part's MA-F2002 SpitzeSchwertBeam horn and the leg part's MMI-S1M7 Tonitrusheavy beam cutting leg. M2X32E Volantes backpack can be unfolded to recreate the flight mode while MA-R259 Beam Riser on the wing can also be unfolded to recreate either the gun or slasher mode.

Contents:

Main body

4 types of interchangeable wrist parts (left and right)

Backpack

2 beam saber handles

Handle for connected beam saber

2 beam saber blades

High energy beam rifl

Rail gu

Shiel

Shield grip

2 types of shield beam blade

Grapple stinge

Head beam effect part

4 beam effect parts for wing

2 types of beam effect parts (left and right) for leg

Beam shield effect part

Joint parts for shiel

Joint parts for rail gun

Joint parts for backpac

Set of joint parts for pedesta

Set of dedicated pedestal

METAL ROBOT SPIRITS Figures – Bandai / Tamashii Nations

The Metal Robot Spirits line showcases Bandai's expertise in crafting premium articulated figures. Merging precision engineering, die-cast metal components, and exquisite detailing, each release pays tribute to iconic mechas from legendary Japanese anime.

These figures stand out for their metallic inner frames, smooth articulation, and interchangeable weapon sets. The attention to detail—from mechanical joints to high-quality paintwork—makes them a must-have for serious collectors.

A blend of technology and elegance, designed for fans of Japanese mecha at its finest.

Please note: this is an expansion kit for the Metal Robot Spirits SIDE MS Strike Freedom Gundam Type II. The model's paint scheme reproduces the colours featured in the film. Accessories include interchangeable Strike Freedom Gundam Type II antenna parts to recreate the convergent heavy nuclear beam cannon ‘Disruptor'. Combine these parts with the Metal Robot Spirits SIDE MS Strike Freedom Gundam Type II (sold separately) to recreate the Mighty Strike Freedom Gundam. Included: Proud Defender Replacement antenna parts for Strike Freedom Gundam Type-2 Backpack for Strike Freedom Gundam Type-2 Lightning effect parts x 8 Futtsunomitama sword Set of joint parts Set of special pedestals.

METAL ROBOT SPIRITS Figures - Bandai / Tamashii Nations

The Metal Robot Spirits line showcases Bandai's expertise in crafting premium articulated figures. Merging precision engineering, die-cast metal components, and exquisite detailing, each release pays tribute to iconic mechas from legendary Japanese anime.

These figures stand out for their metallic inner frames, smooth articulation, and interchangeable weapon sets. The attention to detail—from mechanical joints to high-quality paintwork—makes them a must-have for serious collectors.

A blend of technology and elegance, designed for fans of Japanese mecha at its finest.

The latest transformable alloy model, the ZETA GUNDAM has been released by an all-star lineup of creators, including MorifumiNaka, who served as mechanical animation director for "Mobile Suit Zeta Gundam: A New Translation," as styling advisor. In addition to the beautiful Wave Rider form as seen in the series, experience this "new translation" of the ZETA GUNDAM in a way only METAL BUILD can bring you, incorporating many new features, such as the extension/suspension of the beam rifles and the deployable calf thruster cover.

METAL ROBOT SPIRITS Figures - Bandai / Tamashii Nations

The Metal Robot Spirits line showcases Bandai's expertise in crafting premium articulated figures. Merging precision engineering, die-cast metal components, and exquisite detailing, each release pays tribute to iconic mechas from legendary Japanese anime.

These figures stand out for their metallic inner frames, smooth articulation, and interchangeable weapon sets. The attention to detail—from mechanical joints to high-quality paintwork—makes them a must-have for serious collectors.

A blend of technology and elegance, designed for fans of Japanese mecha at its finest.

EVORETRO ZIP Card Binder – 360 Cards – Black

Protect and organize your collection in style with the EVORETRO ZIP card binder. Designed to hold up to 360 standard-sized cards, it's ideal for trading cards, game cards, or sports cards.

Its sturdy black outer shell and full zip closure ensure optimal protection during transport. Inside, side-loading pockets (9 per side, 18 per sheet) help prevent cards from slipping or getting damaged.

A sleek, durable, and functional accessory made for serious collectors.

Trading Card Box: Saint Seiya – Knights of the Zodiac

Contains 18 packs of 5 cards each.

Collection of 171 cards divided into 14 categories:

R – 34 cards

SR – 20 cards

SSR – 20 cards

AR – 17 cards

QR – 13 cards

UR – 17 cards & 12 cards

MR – 9 cards & 4 cards

UTR – 5 cards & 5 cards

BP – 5 cards & 6 cards

SE – 4 cards

Product presented in a cardboard counter display box.

ONE PIECE Trading Cards - T1W6

Produced by QiquChuangXiang under official license, this One Piece "T1W6" series features a broad selection of visuals from the anime's early major arcs. Iconic characters, legendary battles, and memorable scenes are all part of this richly illustrated collection.

Each display contains 30 boosters, with 5 Chinese-language cards per pack. Expect dynamic artwork, foil effects, and exclusive card designs.

A great addition for One Piece fans and collectors looking for series that stay true to the original spirit of the franchise.

ONE PIECE Trading Cards - MARINE FORD (T2W6)

This "Marine Ford" edition, produced by QiquChuangXiang as part of the T2W6 series, takes collectors deep into one of One Piece's most iconic arcs. Each display contains 30 unfiltered boosters, each with 5 Chinese-language cards.

The collection highlights the key characters of the Marine Ford war, featuring dynamic visuals inspired by this legendary battle. The unfiltered display adds an element of surprise, appealing to collectors who enjoy random pulls.

A product designed for fans of the saga and collectors who build their sets around specific themes or story arcs.

DEMON SLAYER - MUGEN TRAIN ARC Trading Cards

This special edition, produced by Kayou under official license, focuses on one of the most iconic arcs in Demon Slayer: the Mugen Train. The box contains 10 boosters, each with 3 cards in Chinese.

The cards highlight key moments from this arc, featuring characters like Rengoku, Akaza, and Tanjiro. The set is packaged in a compact cardboard box, ideal for shelf or counter display.

A short but focused edition, perfect for collectors looking for themed releases or fans wanting to relive this powerful storyline.

DEMON SLAYER - INOSUKE EDITION Trading Cards

Published by Kayou under official license, this card series highlights Inosuke, the hot-blooded Demon Slayer. The box contains 36 boosters, each with 5 Chinese-language cards.

The edition focuses on visuals featuring Inosuke — from action scenes to stylized portraits and detailed artwork inspired by the Demon Slayer universe. The cards come in a sturdy countertop display box, ready for in-store presentation.

A themed set designed for fans of the series and collectors looking for exclusive character editions.

JUJUTSU KAISEN Trading Cards - BOOSTER WAVE 1

The first wave of Jujutsu Kaisen trading cards by Kayou, officially licensed, features the series' standout characters—from Yuji Itadori to Satoru Gojo.

Each display includes 18 boosters containing Chinese-language cards, with a mix of action scenes, stylized portraits, and iconic anime moments.

A collector's item for both fans and those tracking the series across multiple waves. Packaged in a sturdy cardboard display box, ready for retail.